Table Tent

The table tent creator let you create   4-UP, 2-UP, or 3-UP PDF table tents from your current menu page.

You can use any menu, any size paper, and any page orientation.

To create a table tent use the Tools > Table Tent command. For the Table Tent format choose either 4-UP or 2-UP and then click the Print button.

Once your table tent is printed, simply cut down the middle and fold.

Tip! Using card stock or heavier paper works better.

NOTE For 2-UP or 3-UP table tents, to fit identical menus onto a page the PDF page must be enlarged.
For example, for two long thin 4.25" x 14" menus on one sheet of 8.5" x 14" paper, use File > Page Setup with a custom paper size of 4.25" x 14". Then use 2-UP to create the single 8.5" x 14" PDF page with 2 menus, side by side.
For another example, to fit 2 portrait type table tents onto 8.5" x 11" paper the finale PDF page must be rotated. So use File > Page Setup with a custom paper size of 5.5" x 8.5". iMenuPro will then create 2 menus onto an 11" x 8.5" PDF page.
For a 3rd example, to fit 3 landscape type menus onto legal 8.5" x 14" paper use File > Page Setup with a custom paper size of 8.5" x 4.666". iMenuPro will then create 3 menus onto an 8.5" x 14" PDF page when using the 3-UP option.